Monday, 3 July 2017

EQ (Equalizing )


Equalization  has an important role in audio mixing process. Equalization(EQ) deals with frequency domain so what an equalizer do is adjusting the level of frequency according to the other frequencies so EQ has more crucial tracks at mix down, so the primary purpose of applying EQ is achieving a  good balance rather than achieving tone quality or richness. so the importance of EQ deals with frequency masking which affect our perception whenever we are hearing several instrument playing together.
                                                                  So the ramification of frequency masking for mixing is enormous so the presets coming with EQ plugins have no more use at real mixing we can only use it as demo or study purpose.by the same token an EQ settings used for one mixing can not be expected for the next mixing. because the the range of masking is differentiate from mix to mix, so the masking will only appear when we play all instruments together otherwise in solo it may sound like clear and good and there is no masking. as i mentioned above the main or primary purpose of using EQ is get a good balance, you still need to compensate for frequency masking between  the  instruments in order to maintain the apparent tone of each one with the final mix, which indicate the necessity to process the individual track and it may seem like lost in quality or richness of the tone. Mixing is an illusion its all about how we hearing each time there is no specific rules to mixing
                                                          So now we are going to learn the main parameters on an EQ

Frequency: The center frequency of where the EQ band is placed within the frequency spectrum.



Gain: How much we are boosting or cutting.


                                     



Q (Bandwidth): This represents the range of frequencies that are being adjusted by the Gain control. A frequency with a high Q will affect a narrow range and a frequency with a low Q will affect a wider range




Fundamental frequencies of equalizing

 for doing a great job with EQ we have to know about  the frequencies, so there are some fundamental frequencies

1. Low End (125Hz and below): This is where all sub-bass and bass instruments reside. Be careful, this frequency range is generally better “felt” than heard. 

2. Low-Mids (125Hz–500Hz): This range has the fundamental frequencies of a lot of lower range instruments and can be a tricky one to master. Too much in this range could be described as “muddy”, while too little will have your mix lacking power. 

3. Mid-Range (500Hz–2kHz): Almost every instrument sits somewhere in this range (vocals, snare, guitars, piano, horns, etc.). This is where you will spend most of your time getting your instruments to fit together.

4. High-Mids (2kHz–8kHz): This range is where a lot of upper harmonics live (vocal breaths, cymbals, etc.). This range is where you will find the “snap” in a kick drum and the “pluck” of an acoustic guitar.


5. High End (8kHz and above): This is where the “air” and “sizzle” resides.  Too much energy in this range can be fatiguing and will make the mix sound thin, while too little will make the mix dull.








 shelves filters 

           so the basics of shelving filters is each of these filters can change the frequency balance of a sound in different ways. using a shelving filter or shelf a broad brush processor that can change the level of one whole end of frequency spectrum. so there are two types of filters low shelf and high shelf a low shelf filter which affect the lower end of the frequency spectrum  and the high shelf affect the high end of the spectrum.


to use this shelving filters commonly called shelf first find the trouble area and you can find some muddy bass unwanted elements that is probably lays with sub bass or bass frequencies. then load an appropriate shelving filter to try to get some control over it , then if you find the exact region then gradually lower the gain control until you feel comfortable.
                                                            whenever you cut a section then the total depth of the tone reduces so always try to adjust the over all level consistent 



After these shelving filters another kind of filters are pass filters specifically high pass filter and low pass filters the
The circuitry of a pass filter can be as simple as a mere combination between a capacitor and a resistor. The reference frequency of pass filters is called the cut-off frequency. Pass filters allow frequencies to one side of the cut-off frequency to pass, while continuously attenuating frequencies to the other side. A high-pass filter (HPF) allows frequencies higher than the cut-off frequency to pass,



Another characteristic of a pass filter is slope. This determines the steepness of the filter curve. The slope is expressed in dB per octave (dB/oct or dB/8ve), with common values being a multiple of six. A gentle slope of 6 dB/oct means that below the cut-off frequency each consecutive octave experiences an additional 6 dB of gain loss. With an aggressive slope of 30 dB/oct, it will only take two octaves before frequencies are attenuated by more than 60 dB (a point that can be perceived as effective muting). Generally, the steeper the slope the more unwanted effects the filter produces
                                                                 High pass filter is the most common parameter in an EQ, almost all tracks need this filter to cut off unwanted frequencies around bass sector, so if we recorded an electric guitar and it has some bass frequencies but when we come to mixing we do not need that bass frequencies because we have bass guitar and 
kick drum and we need that space for these two elements that is the place we are using high pass filter to remove unwanted frequencies 


 Every instrument has a fundamental (lowest) frequency for each note that it plays.  Try to listen and learn the basic frequency ranges for each instrument you’re working with. Knowing this can help inform when and where you cut and boost. 

• Knowing where the fundamentals and harmonics (frequencies that are a multiple of the fundamental, i.e.: a 100Hz fundamental has harmonics of 200Hz, 400Hz, etc.) are for each instrument can help eliminate some guesswork you may be doing while EQ’ing tracks in your mix. To illustrate, let’s use the example of trying to create space for a lead vocal when you feel something is crowding it. Try adjusting the EQ of other instruments with a similar frequency footprint as the vocal (like piano, guitar, snare, etc.); if that doesn’t work, it has to be something else. Maybe it’s the kick drum? A typical kick drum can have a fundamental frequency of 80-100Hz and have a harmonic near the vocal register. If this is the case, removing EQ from the kick drum between 2-3kHz can make the vocal sit loud and clear atop the mix. So, if changing the obvious culprits doesn’t fix the problem, investigate further to find the issue. A quality mix is worth the effort.


here some good rules for equalizing 

  •     If it sounds muddy, cut some at 250Hz.
  •     If it sounds honky, cut some at 500Hz.
  •    Cut if you’re trying to make things sound better.
  •    Boost if you’re trying to make things sound different.
  •    You can’t boost something that’s not there in the fi rst place
Graphic equalizer
    
In the graphic equalizer, the input signal is sent to a bank of filters. Each filter passes the portion of the signal present in its own frequency range or band. The amplitude passed by each filter is adjusted using a slide control to boost or cut frequency components passed by that filter. The vertical position of each slider thus indicates the gain applied at that frequency band, so that the knobs resemble a graph of the equalizer's response plotted versus frequency. The number of frequency channels (and therefore each one's bandwidth) affects the cost of production and may be matched to the requirements of the intended application. A car audio equalizer might have one set of controls applying the same gain to both stereo channels for convenience, with a total of five to ten frequency bands. On the other hand, an equalizer for professional live sound reinforcement typically has some 25 to 31 bands, for more precise control of feedback problems and equalization of room modes. Such an equalizer (as shown above) is called a 1/3-octave equalizer (spoken informally as "third-octave EQ") because the center frequency of its filters are spaced one third of an octave apart, three filters to an octave. Equalizers with half as many filters per octave are common where less precise control is required—this design is called a 2/3-octave equalizer.

The process of equalizing 

                   first find the best volume level for the required track because equalizing can affect the volume level of the track, so one you've got the suitable volume then use a high pass filter to remove the unwanted bass frequencies. take a guess of which is the exact place to add this high pass filter, it depends on the type of  instrument because different instrument has different bass frequencies then load this filter and cut until you find this affecting the body of the instrument or you can find something lose then move it back little it












No comments:

Post a Comment

Play piano effortlessly - Play without effort: EQ (Equalizing )

Play piano effortlessly - Play without effort: EQ (Equalizing ) : Equalization  has an important role in audio mixing process. Equalization(...